Mobotix MX-2WirePlus-Set-PW Mx2wire+ turns an existing two-wire cabl

Mobotix MX-2WirePlus-Set-PW Mx2wire+ turns an existing two-wire cabl

Mx2wire+ turns an existing two-wire cable into a modern multimedia cable ? Ethernet and PoE data transfer using a two-wire cable ? Simple connection of 10/100 Mbps Ethernet end devices (e.g., IP camera, IP telephone) ? Power supply for Mx2wire+ and end device via PoE/PoE+ or 48?57 V DC, 600 mA ? Connected end devices are supplied with up to 13 watts via PoE (PoE class 3) ? Maximum data transfer range of 500 m and data rate of up to 50 Mbps (depending on distance) ? No need for expensive and time-consuming installation of network cables ? Perfect for wireless communication is not possible (due to distance to sender, thickness of walls, etc.) ? Network extension, including PoE, by connecting a Cat7 cable of up to 500 m in length as a two-wire cable ? Simple installation in standard sockets (surface- or flush-mounted) ? Two LEDs display current connection and supply statuses ? Developed, produced and patented by MOBOTIX Germany ? Ambient temperature: -30 to 50?C / -22 to 122?F ? Complete set consisting of two Mx2wire+ units, on-walls sockets and mounting parts
Using the Mx2wire system from MOBOTIX, an Ethernet network with PoE can be established using existing cables up to 500 m. This means that you can utilize a two-wire cable that is no longer in use (analog telephone line, antenna cable or bell wire, for instance) to connect a 10/100 Mbps Ethernet device such as a PC, WLAN, IP camera, IP telephone or IP door station without having to lay any new cables or implement any other constructional measures. An (identical) Mx2wire unit is required at both ends of the cable, and it automatically configures itself as either the sender or the receiver (MOBOTIX patent).
The significant additional benefit of Mx2wire is that, in addition to data, the power to operate PoE end devices (Power over Ethernet according to the IEEE 802.3af standard, a MOBOTIX network camera, for example) can also be transferred via the two-wire cable.
Mx2wire is supplied via PoE from the network cable that feeds in. The connected end devices are supplied with up to 7 watts via PoE. Mx2wire does not, therefore, require its own power supply, as the network distributor (switch) typically supplies power over the data cables (PoE) so that the two Mx2wire units, as well as the standard PoE end device, are supplied.
Mx2wire is delivered in a standard socket frame in different designs, however, it can also be used with the surface-mounted socket provided.

Features

• Two-wire cables are used to connect 10/100 MB Ethernet devices
• Ideal to connect e.g. a PC, WLAN, IP camera, IP telephone, IP door station
• Data transfer distance up to 500 meters; data rate is up to 30 Mbps, depending on distance
• Connected devices are supplied with up to 7 watts via PoE
• Simple installation in standard socket frames or surface-mounted sockets