SDC Z7850LQE SELECTRIC PRO MORTISE LOCK FAILSAFE LH 12/24VDC ECLISPE TRIM 626

SDC Z7850LQE SELECTRIC PRO MORTISE LOCK FAILSAFE LH 12/24VDC ECLISPE TRIM 626

The SDC Z7850LQE is an electrified mortise left-handed lockset that is locked from the outside only and failsafe operation. The unit is equipped with an SDC lock, an Eclipse with rose lever trim and has a satin chrome finish.

SDC HiTower locksets comply with all national and regional building codes for locking interior office, elevator lobby, exit and stairwell fire rated doors, where the use of electric strikes and magnetic locks is prohibited. HiTower locksets also provide higher security and superior aesthetics compared to exposed and vulnerable electric strikes and magnetic locks, while eliminating the need for request-to-exit devices. While providing controlled access and remote control capability the door stays latched even when unlocked, maintaining fire door integrity.

The HiTower lock consists of a mechanical door lock controlled by an electric actuator installed in the frame. All access control and monitoring wires are maintained in the frame. Power transfer hinges and wires through the door are not required. All expenses associated with power transfer hinges are eliminated, including costs for door wire chases that must be factory prepared to maintain the doors fire ratings.

Features:

• Satin Chrome finish
• Handing: Left-handed
• Dual Voltage: 600/300 mA @ 12/24VDC
• Backset: 2-3/4″
• Strike: 4-7/8″ (Standard)
• Door thickness: 1-3/4″ Standard
• Locked outside sides, failsafe. Field reversible to failsecure mode.
• Latch bolt: 3/4″ Anti-friction bolt with an auxiliary deadlatch
• Trim: Eclipse with rose SDC trim
• Cylinder Type: Conventional cylinder
• Switch Type: None

Technical Specifications:

• Dual Voltage: 600/300 mA @ 12/24VDC
• Mode: Field Reversible, Failsafe/Failsecure
• Door Thickness: 1-3/4″ standard
• Door Preparation: ANSI A156.13
• Latch Bolt: 3/4″ anti-friction bolt with auxiliary deadlatch
• Backset: 2-3/4″
• Strike: 4-7/8″ (standard)
• Key Override: 6 PIN, 1-1/4″ Mortise cylinder with Schlage C keyway (optional)