Larson Electronics EPNFDS-MTS-800A-3P 800A Explosion Proof Manual Transfer Switch – C1D1/C2D1 – 3P Double Throw – IP66

Larson Electronics EPNFDS-MTS-800A-3P 800A Explosion Proof Manual Transfer Switch – C1D1/C2D1 – 3P Double Throw – IP66

Description:

The Larson Electronics EPNFDS-MTS-800A-3P Explosion Proof Manual Transfer Switch allows operators to manually switch between two power sources, perform power isolation and switch loads in flammable work sites. This 800-amp unit contains a 3-pole double throw configuration and is rated at 600V AC max. The explosion proof manual transfer switch is protected by a NEMA rated enclosure with stainless steel cover bolts.

*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO EXPLOSION PROOF ENCLOSURES*

The EPNFDS-MTS-800A-3P is a non-fused manual transfer switch for hazardous locations, flammable work sites and combustible spaces. Equipped with a 3-pole, double throw configuration, this 800-amp unit can be used to switch between two sources of power, including between line voltage and a generator. The explosion proof device is non-fused and features a lockable switch to deter tampering (up to 3 locks, in ON or OFF position).

The explosion proof manual transfer switch is constructed of cast aluminum with stainless steel cover bolts. A gasketed flange with O-ring (in the side bolt circle) is available for protection from the ingress of moisture. This unit is rated for NEMA 4X environments, making it ideal for indoor and extreme outdoor applications.

Hubs: Operators can access a total of six NPT hubs, with two 2″ NPT and one 1/2″ NPT hubs located at the north side of the enclosure, and two 2″ NPT and one 1/2″ NPT hubs located at the south side of the enclosure.

Mounting: The EPNFDS-MTS-800A-3P is compatible with surface-mounting applications.

Applications: Manual transfer switch, switching electrical loads, power isolation, emergency power systems, power management, hazardous locations, motor circuits, petroleum refineries, chemical and petrochemical plants, storage areas, and other processing facilities where hazardous substances are handled or stored.

Features:

• Listing: United States, Canada
• Dimensions: 23.88″ W x 47.88″ H x 14.25″ D
• Weight: 419 lbs
• Configuration: 3-Pole, Double Throw
• Voltage Rating: 600V AC (Maximum)
• Amps: 800A
• HP: 1PH- 2 HP @ 120V AC, 5 HP @ 200V AC/240V AC; 3PH- 10 HP @ 200V AC/208V AC, 7.5 HP @ 240V AC, 15 HP @ 480V AC, 20 HP @ 600V AC
• Fusible: No
• Materials: Copper-free Aluminum
• Hardware Materials: Stainless Steel (Hinges, Cover Bolts)
• Mounting: Surface Mount
• Hub Sizes: (2) 2″ NPT, (1) 1/2″ NPT [North Side], (2) 2″ NPT, (1) 1/2″ NPT [South Side]
• Wire Size: #14-4
• Conduit: Drilled and Tapped Entrances
• Color: Natural Gray
  *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*