Falcon 24-C-EO-26D-4FTX7FT 24 Series Exit Device

Falcon 24-C-EO-26D-4FTX7FT 24 Series Exit Device

Description:

Panic exit hardware
Concealed vertical rods add strength to the door, while maintaining an attractive appearance. The Falcon 24-C Series concealed vertical rod device offers great value, clean styling, a versatile narrow stile design and the security benefits of two-point latching. Falcon?s patented center slide mechanism allows easy rod adjustment in the field.

Specifications:

• Hand:
  Field reversible or specify handing.
• Finishes:
  US3 (605); US4 (606); US10 (612); US11 (643e); US15 (619); US19 (622); US26 (625); US26D (626); US32 (629); US32D (630); US28 (628), 313AN (710)
• Strikes:
  4188 mortised top and 2130 flush strike bottom, optional bottom 2126A and 4155
• Latchbolt:
  Top stainless steel, top latch 3/4″ throw.
  Bottom bolt 1/2″ throw.
• Deadlocking latchbolt:
  Standard with top latch.
• Latch retention hold:
  Standard with top latch.
• Dogging feature:
  Half turn hex dogging standard.
  No threaded parts to wear out.
• Cylinder dogging:
  Specify “CD” prefix. Uses 1 1/8″ long mortise cylinder dogging with standard cam.
• Doors:
  1 3/4″ thick, wood or metal. Specify if other than 1 3/4″ thick.
• Projections:
  2 3/4″ maximum, 2″ dogged.
• Stile:
  2 1/4″ minimum when used in pairs. (6″ minimum on wood doors)
• Electric functions:
  Can be interfaced with building security systems. Motorized electric latch retraction (fail secure only), security monitoring, delayed egress and exit alarm available.
• Fasteners:
  All mounting screws are concealed, sheet metal screws standard, machine screws available, specify AMS.
• Sex bolts:
  Recommended when device is used with hollow core wood, composite or light gauge hollow metal doors. For EO device, specify 2 – 425 (#10-24) SNB and 2 – 325 (1/4-20) SNB. For devices with trim, specify 2 – 425 (#10-24) SNB.
• ANSI:
  Certified ANSI A156.3-2001 grade 1 standards.
• 24-V-LBR:
  Less bottom rod concealed vertical device.
• Vertical rods:
  Furnished to length based on 40″ horizontal CL to finished floor and a 7’0″ door. Variations from these standards must be specified when ordering.
• Patented centerslide:
  For ease of adjustment.
• Shim kits:
  Consult factory