Larson Electronics EPL-AED-1X-MOD9581 Explosion Proof Device Box Instrument Enclosure – C1D1 – Aluminum – (4) Tapped Mounting Holes

Larson Electronics EPL-AED-1X-MOD9581 Explosion Proof Device Box Instrument Enclosure – C1D1 – Aluminum – (4) Tapped Mounting Holes

Description:

The EPL-AED-1X-MOD9581 from Larson Electronics is an Explosion Proof Device Box Instrument Enclosure that houses compact instruments or devices used in hazardous locations, confined spaces and industrial facilities. The EPL-AED-1X-MOD9581 is Class I, Divisions 1 & 2, Groups B, C, D, Class I, Zones 1 & 2, Groups IIB+H2, IIA, Class II, Divisions 1 & 2, Groups E, F ,G and Class III Divisions 1 & 2 rated for hazardous areas and is listed for use worldwide including the United States, Canada, Europe and Asia. This explosion proof instrument enclosure may be used to comply with domestic and international code requirements, while providing protection for operators and nearby workers. Four 4mm tapped mounting holes are located inside the enclosure to mount operator provided equipment.

The EPL-AED-1X-MOD9581 offers protection from explosive hazards and ignitions, dust, harsh weather and rough treatment (tampering). This unit is cast from a copper-free aluminum alloy for durability. Neoprene 0-rings are provided with the enclosure to assure water resistance in NEMA 4/IP66 conditions. For maximum use of interior space, the explosion proof device box comes with offset feed-thru conduit openings (3/4? NPT). An internal ground screw is conveniently located away from the mounting components. The enclosure is finished with silver powder epoxy paint (electrostatically applied).

A special “X” configured cast-in mounting pad is available for flexibility during application. There is also a cast on side boss for optional machining, external mounting lugs on cover for seamless removal and tightening and an optional external ground screw. The ground screws are made out of zinc plated steel with green dye, while the allen head cover screw is constructed of cadmium plated steel. Four 4mm tapped mounting holes are located inside the enclosure, allowing operators to securely mount their own equipment easily. The explosion proof device box is rated NEMA Type 3, 4, 4X, 7 (B,C,D) and 9 (E,F,G) and designed to withstand the rigors of demanding environmental and operating conditions while remaining robust and easy to use.

Applications: Flow measurement devices, temperature monitors, two-wire transmitters, gas detectors, Ph analyzers, pressure gauges, level detectors, H2S monitors, transducers, pressure switches and other compact industrial instruments/devices.

Features:

• Device Type: Explosion Proof Instrument Enclosure
• External Dimensions: 4-17/32″H x 6-1/8″W
• Internal Dimensions: 3-3/32″”H x 4-1/4″ID
• Internal Volume: 31 cu. in.
• Weight: 3 lbs
• Cover Material: Copper-free Aluminum Alloy
• Allen Head Cover Screw Material: Cadmium Plated Steel
• Sealing Gasket: Neoprene O-ring
• Ground Screw Material: Zinc Plated Steel w/ Green Dye
• Enclosure Finish: Silver Powder Epoxy Paint, Electrostatically Applied
• Internal Mounting: (4) 4mm Tapped Mounting Holes Inside Enclosure
• Cast-in Mounting Pad Configuration: X
• Design: Single Cover Box Only
• Wiring Hubs: Offset Feed-thru (3/4″ NPT)