Larson Electronics EPS-2XPB-PTM.10K-MOD1 Explosion Proof Switch w/ Potentiometer – C1D1, C2D1 – 1-10K Ohms – Rotary Dial – Double Gang Box – (2) NO & (2) NC Contacts

Larson Electronics EPS-2XPB-PTM.10K-MOD1 Explosion Proof Switch w/ Potentiometer – C1D1, C2D1 – 1-10K Ohms – Rotary Dial – Double Gang Box – (2) NO & (2) NC Contacts

Description:

The Larson Electronics EPS-2XPB-PTM.10K-MOD1 Explosion Proof Push Button Switch with Potentiometer is suitable for motor and electrical control in flammable work sites. The 10-amp device features a robust potentiometer with 1-10k Ohms resistance for up to 2 watts at 32V DC, which can be set using a rotary dial. This NEMA-rated unit is constructed of non-sparking aluminum and takes on a double-gang box configuration. This unit has 4 contacts: (1) Normally Closed and (1) Normally Open on the start button, and (1) Normally Closed and (1) Normally Open on the stop button.

The EPS-2XPB-PTM.10K-MOD1 designed for use in Class I, Divisions 1 & 2; Class II, Divisions 1 & 2; and Class III, Divisions 1 & 2 facilities. Rated at 10 amps, this explosion proof unit accepts currents ranging between 120-277V AC. The device features a pontentiometer with 1-10k Ohms resistance for up to 2 watts at 32V DC. Operators can make adjustments to the instrument using a rotary dial. The unit has momentary stop/start push buttons which allows locking of the ON/OFF position. The stop and start push buttons both include (1) Normally Closed and (1) Normally Open contact, for a total of 4 contacts.

The EPS-2XPB-PTM.10K-MOD1 is constructed of non-sparking aluminum and is triple coated. The lever is connected to a threaded stainless steel shaft that passes through the faceplate. The entire unit is completely corrosion resistant and is NEMA rated.

Wiring/Mounting: Operators can completing wiring and mounting via a 1/2″ or 3/4″ NPT hub. Termination options include dead end or feed thru.

Suggested Applications: Hazardous locations, oil and gas sites, agricultural operations, grain storage, woodshops, motor control and more.

Features:

• Unit Type: Explosion Proof Push Button Switch w/ Potentiometer
• Dimensions: –
• Weight: –
• Switch Style: Momentary Push Button (Stop/Start)
• Voltage: 120-277V AC
• Horsepower: 1HP @ 120VAC / 2HP @ 250VAC
• Amp Rating: 10A
• Pontentiometer Resistance: 1-10K Ohms
• Pontentiometer Dial Type: Rotary
• Contacts: (1) NO & (1) NC [Green Button] , (1) NO & (1) NC [Red Button}
• Materials: Non-sparking Aluminum
• Termination Options: Dead End or Feed Thru
• Hub Options: 1/2″ or 3/4″ NPT