Larson Electronics EXP-MS-N4X-AT-LV-V7 Explosion Proof Motion Sensor – Detection up to 40m x 38m – Adjustable Timer – LV

Larson Electronics EXP-MS-N4X-AT-LV-V7 Explosion Proof Motion Sensor – Detection up to 40m x 38m – Adjustable Timer – LV

Description:

The Larson Electronics EXP-MS-N4X-AT-LV-V7 Explosion Proof motion sensor is Class I, Division 1 & 2 and Class II, Division 1 & 2 rated and provides the ability to power lights or other equipment within hazardous locations based on motion. This low voltage motion sensor features adjustable sensitivity and time delay after motion. Designed for high bay lights or detecting horizontal movement, this unit is suitable for sensing motion in a zone measuring 40 meters by 38 meters.

The low voltage explosion proof motion sensor is ideal for operators seeking a high quality explosion proof motion sensor rated for use in hazardous areas designated Class I, Division 1 and Class II, Division 1. This explosion proof motion detector can be mounted at distances up to 40 meters away from the target area, at a mounting height of 5 meters. The entire unit is constructed of copper free non-sparking aluminum construction with a glass window for motion detection. This unit is easily wall mounted via integral mounting bracket, which can be adjusted -90? to +30? vertically after installation. The explosion proof housing provides two 1/2″ or 3/4″ hub openings located on either side of the housing for running electrical conductors in a feed through configuration. A bushing seal at each conductor opening prevents damage to wiring insulation.

This unit leverages cutting-edge microwave sensors to detect motion. When in use, the device sends out discreet waves that are reflected back from nearby walls and objects (not heat or light). Microwave sensors are not affected by line of sight, resulting in wider and more accurate coverage of the target area. By comparison, traditional infrared sensors can only detect heat and light (factors used to identify movement) within the unit?s field of view. Microwave sensors also provide stable performance in unpredictable climates and can penetrate glass, plastic and other non-metallic objects.

This unit is designed to operate on low voltage 12-24V AC or DC electrical circuits. We also make a model that is designed to operate on 120-277V high voltage electrical systems. This motion sensor is suitable for use in environments where combustible dusts and particulates may be present.

Motion Detected Through a Wall
1/2″ or 3/4″ NPT tapped conduit openings are provided on either of the unit in feed through versions while dead end versions have a single conduit hub, providing easy and secure connection to main power line supplies.

Suggested Applications: High Bay Lights, Horizontal Movement Detection, Manufacturing, Industrial, Warehouse, Lighting, Lighting, Wet areas or Locations Where Combustible Dust is Present.

Features:

• Listing: NRTL Listed for United States, Canada and International; ATEX/IECEx Rated
• Listed for United States & Canada
• Detection: Motion
• Detection Distance: 40m x 38m Zone
• Tilt Angles: -90? to +30? in Elevation
• System Voltage: 12 or 24V AC/DC
• Maximum Amperage: 5A
• No Load Current: 1W, 0.09A @ 12V, 0.045A @ 24V
• Output Hold Time: 0.5 seconds to 15 minutes (Adjustable)
• Mains Frequency: 50/60 Hz
• Ambient Temperature Range: -22?F to +140?F
• Radiated Frequency: 10 GHz
• Mounting Height: 5 meters