Larson Electronics EXP-UPS-120V-750VA-6X-10C-V1 Explosion Proof Uninterruptible Power Supply – 120V – (6) Receptacles – 10′ Cord w/ Cord Cap
Description:
The EXP-UPS-120V-750VA-6X-10C-V1 is an Explosion Proof Uninterruptible Power Supply (UPS) for flammable environments. This battery backup unit works with 120V AC 50/60 Hz (input and output) and contains six explosion proof receptacles at the top of the UPS. Protected by a copper-free cast aluminum enclosure, the NEMA-rated device comes with 10` of line-in cord and an explosion proof cord cap.
The EXP-UPS-120V-750VA-6X-10C-V1 provides battery backup support for customer-provided equipment in combustible work sites. This UPS features 120V AC 50/60 Hz (+/- 3Hz) input and output compatibility. Equipped with an output power capacity and maximum configuration power of 500 watts/750 VA, this unit contains a leakproof maintenance-free sealed lead acid with suspended electrolyte battery. The battery takes approximately 3 hours to recharge and comes with an expected lifespan of 3-5 years. This UPS features a surge energy rating of 540 joules and full-time multi-pole noise filtering. An accessible black pushbutton is available for on/off functions on the enclosure, as well as a green pilot light for monitoring the status of the explosion proof UPS.
This unit is constructed of copper-free cast aluminum, equipped with steel bolts and includes a weatherproof gasket for a NEMA 3R/NEMA 4 protection rating. The battery backup device is finished in aluminum lacquer paint for durability and is designed for indoor and outdoor use, while providing a degree of protection against dirt, water and external ice formation.
Receptacles: Located at the top of the explosion proof UPS, operators may access six explosion proof receptacles for powering customer-provided equipment. The receptacles accept 5-15P and 5-20P explosion proof cord caps.
Wiring/Mounting: The EXP-UPS-120V-750VA-6X-10C-V1 comes with 10` of line-in cord with an explosion proof cord cap. Cord cap options include 5-15P or 5-20P. This explosion proof unit is compatible with surface-mount requirements.
Applications: Industrial facilities, hazardous locations, offshore refineries, marine locations, indoor/outdoor spaces, agricultural sites, ship yards, docks, chemical processing plants, flammable work sites and more.
Features:
- Unit Type: Explosion Proof Uninterruptible Power Supply
- Dimensions: 22.38″ x 28.38″ x 13.75″
- Weight: 438 lbs
- Input/Output Voltage: 120V AC, 50/60Hz +/- 3Hz (Input Auto-sensing)
- Output Power Capacity: 500W/750VA
- Max Configurable Power: 500W/750VA
- Output Voltage Distortion: Less Than 5%
- Waveform Type: Sine Wave
- Battery Type: Maintenance-free Sealed Lead-Acid w/ Suspended Electrolyte, Leakproof
- Recharge Time: 3 Hours
- Expected Battery Life : 3-5 Years
- Surge Energy Rating: 540 Joules
- Filtering: Full-time Multi-pole Noise Filtering: 0.3% IEEE Surge Let-through: Zero Clamping Response Time
- Pushbutton: On/Off (Black)
- Pilot Light: Green
- Operating Temp: 0?C to 40?C
- Operating/Storage Relative Humidity: 0-95%
- Operating Elevation: 0-10,000`
- Storage Temp: -15?C to 45?C
- Storage Elevation: 0-50,000`
- Enclosure Material: Copper Free Cast Aluminum (less than 4/10 of 1%)
- Hardware Material: Zinc Plated Steel
- Enclosure Finish: Aluminum Lacquer Paint
- Mount: Surface Mount Legs
- Receptacles: (6) Accepts 5-15P and 5-20P EXP Cord Caps
- Wiring: 10` Line-in Cord w/ EXP Cord Cap
- Cord Cap Options: 5-15P or 5-20P
*All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*
Reviews
There are no reviews yet.