Nexlar E-Commerce

Larson Electronics IND-EMG-RBP-120V-150W-12V-N3R Emergency Battery Pack – 120V to 12V – 150W Capacity – 12V DC Output Voltage

SKU : IND-EMG-RBP-120V-150W-12V-N3R Category

Emergency Battery Pack – 120V to 12V – 150W Capacity – 12V DC Output Voltage

Larson Electronics IND-EMG-RBP-120V-150W-12V-N3R Emergency Battery Pack – 120V to 12V – 150W Capacity – 12V DC Output Voltage

 

Description:

The IND-EMG-RBP-120V-150W-12V-N3R from Larson Electronics is an Emergency Battery Pack that works in conjunction with a LED fixture to create an emergency lighting system. This battery pack has a 150-watt capacity. It allows the connected fixture(s) to be on, off, switched or dimmed without affecting emergency operation. Each unit consists of a high-temperature nickel-cadmium battery, charger, and electronic circuitry in one steel case. The IND-EMG-RBP-120V-150W-12V-N3R provides power to the input side of the fixture, including the ballast, and can be used with indoor or outdoor emergency fixture applications.

The IND-EMG-RBP-120V-150W-12V-N3R is a 120 V to 12 V emergency battery pack. This means that it has an input charge voltage of 120 V AC and an output voltage of 12 V DC. This unit can power 150 watts of lighting for a minimum of 90 minutes. The lower the connected wattage, the longer the emergency battery pack can power the connected lights. For example, it can power 75 watts of lighting for 180 minutes. Each unit is contained in one 12″ x 12″ x 6″ metal case.

Upon failure of normal power, the emergency battery pack instantly begins providing emergency power to the connected lighting load. A solid-state low voltage disconnect circuit protects the inverter battery from severe damage by deep discharge during prolonged power failures. When normal power is restored, the IND-EMG-RBP-120V-150W-12V-N3R automatically returns to charge mode. The battery capacity is fully restored in 24 hours. The ballast does not affect normal fixture operation and may be used with a switched or unswitched fixture. It can be installed in close proximity to the fixture or remote from the fixture (up to 250 feet).

Specifications:

  • Type: Emergency Battery Pack
  • Dimensions: 12.00″ x 12.00″ x 6.00″
  • Weight: 25 lb
  • Input (Charge) Voltage: 120 V AC
  • Output Voltage: 12 V DC
  • Maximum Wattage Capacity: 150W
  • Battery: –
  • Battery Life: –
  • Recharge Time: 24 Hours
Weight 25 lbs
Brand

Reviews

There are no reviews yet.

Be the first to review “Larson Electronics IND-EMG-RBP-120V-150W-12V-N3R Emergency Battery Pack – 120V to 12V – 150W Capacity – 12V DC Output Voltage”

Your email address will not be published. Required fields are marked *

IND-EMG-RBP-120V-150W-12V-N3R Spec Sheet

Download

IND-EMG-RBP-120V-150W-12V-N3R Manual

Download

IND-EMG-RBP-120V-150W-12V-N3R Wiring Diagram

Download