DynaLock 3101C-TJ101-G2 SURFACE MOUNT, INSWING, SINGLE, 1500

DynaLock 3101C-TJ101-G2 SURFACE MOUNT, INSWING, SINGLE, 1500

The self-contained 3101C-TJ101 incorporates delayed egress sequencing electronics and a built-in egress sensing system which, during an unauthorized exit attempt, detects minor door movement, following latch retraction, to automatically initiate alarmed/ time-delayed release of the electromagnetic lock, in conformance with Life Safety Code NFPA-101. System reset and/or authorized bypass may beaccomplished via the supplied key switch station, or external, remote dry-contact signaling device (i.e., keypad, card reader, push button, etc.). The 3101C-TJ101 is field-selectable to operate on 12 or 24 VAC/VDC input voltage, and will immediately unlock upon loss of input power, and/or dry-contact signal from a building?s fire alarm control panel. It is not intended for use on emergency egress doors.

Features:

• Microprocessor Controlled: An advanced digital processor on-board manages all lock functions, without the need for an external system controller. Custom factory programs are available to meet varying job requirements and local building codes.
• Low Installation Cost: The user friendly micrometer style adjustment wheel simplifies calibration of delay egress sensor and works with existing door hardware.
  Does not require electrified latch hardware, transferhinges, door cords or special power supplies.
• Auto-Sensing Power Input: Will operate on 12 or24 VAC/VDC.
• Selectable Nuisance Delay: 1 or 3 second to deterfalse alarms.
• Opto-Electronic System Sensor: Featuring a new concealed optical sensor unaffected by wind, warpage ordoor sag.
• Holding Force: 1500 Lbs. high security holding force per lock effectively deters forced access or egress.
• Lifetime Warranty – American Made in the USA by DynaLock, with over 25 years experience in the manufacture of electromagnetic locks.