Honeywell v128fbp-kt66 VISTA-128FBP, (2)6160

Honeywell v128fbp-kt66 VISTA-128FBP, (2)6160

Designed to integrate seamlessly with CCTV, access control
and Honeywell?s full range of fire and burglary components,
the new VISTA-128FBP provides the ultimate protection of life
and property. The UL Listed commercial fire and burglary
control panel supports up to eight partitions and up to
128 zones/points using hardwired, wireless and V-Plex?
addressable technologies. A diverse line of Honeywell
initiating devices, notification circuits, communication devices,
keypads, RF receivers and relays are also supported. The
VISTA-128FBP has been designed to mount quickly and
easily in an attack resistant cabinet, and is available in 12V
and 24V models.

Specifications

• Primary power: 18VAC @ 72VA
  Honeywell No. 1451
• Control panel quiescent current draw:
  300mA
• Backup battery:
  ? 12VDC, 12AH min to 34.4AH max
  ? Lead acid battery (gel type)
• Alarm power: 12VDC, 1.7A max for
  each notification (bell) circuit output
  Total 2.3A @ 12V
• Aux. standby pwr: 12VDC, 1A max
• Total power: 2.3A at 12VDC, 3.4A at
  24VDC from all sources
• Standby time: 24 hours with 1A
  standby load using 34.4AH battery
• Fusing: Battery input, aux. and
  notification (bell) circuit outputs are
  protected using PTC circuit protectors.
  All outputs are power limited
• Optional 24-volt power supply, PS 24
  supplies two 24 VFW, 1.7A full wave
  rectified, unfiltered outputs
• Line seize: Double Pole
• Ringer equiv.: 0.7B
• Formats: ADEMCO Low Speed,
  ADEMCO 4+2 Express, ADEMCO High
  Speed, ADEMCO Contact ID, Sescoa
  and Radionics
• Dual phone line capability (using
  5140DLM module)
• 18″ H x 14.5″ W x 4.3″ D
• EMI: Meets or exceeds the following
  requirements:
  ? FCC Part 15, Class B Device
  ? FCC Part 68
  ? IEC EMC Directive

Features

• Eight hardwired zones standard,
  expandable to 120 V-Plex
  addressable points/zones or
  128 wireless points/zones
• Can control eight separate areas
  independently (8 partitions)
• Supports commercial wireless fire
  and burglary devices
• Stores up to 512 events
• Accommodates 150 user codes and
  up to 250 access card holders using
  VistaKey
• Supports V-Plex addressable VistaKey
  access control (1 to 8 doors)
• Two on-board notification (bell) circuits
  delivering 2.3A @ 12V or 3.4A @ 24V
• Automatic smoke detector sensitivity
  maintenance testing
• Four-wire smoke reset using onboard
  J2 output trigger
• Supports Dynamic Signaling for
  AlarmNet Communicators
• Supports Remote Control via
  the Internet*
• Supports Internet Alarm Reporting*
• Supports Graphical User
  Interface Consoles
• Listed to UL864 9th Edition
• Upload/download via Ethernet
• Carbon monoxide (CO) zone support