Nexlar E-Commerce

PELCO EC-1504U-W EthernetConnect Local or Remote Four Port Extender Cat5 with Pass Through PoE to 15 Watts Wall Mount

SKU : EC-1504U-W Category

Pelco EC-1504U-W | Extends Ethernet up to 914 m (3,000 ft) at 10 Mbps or 610 m (2,000 feet) at 100 Mbps over Cat5/Cat5e/Cat6 UTP Cable | Full 10/100 Mbps Bandwidth. Buy Now.

PELCO EC-1504U-W EthernetConnect Local or Remote Four Port Extender Cat5 with Pass Through PoE to 15 Watts Wall Mount

Pelco EC-1504U-W | Extends Ethernet up to 914 m (3,000 ft) at 10 Mbps or 610 m (2,000 feet) at 100 Mbps over Cat5/Cat5e/Cat6 UTP Cable | Full 10/100 Mbps Bandwidth. Buy Now.

EthernetConnect local or remote 4 port extender Cat5 Pass through 15 Watts PoE. The EC-1500C Series is ideally suited for applications where the existing coaxial cable needs to be leveraged for transmission of IP signals. For UTP applications, the EC-1500U Series is an effective Cat5/Cat5e/Cat6 UTP extender device beyond the 100 m (328 ft) limit of traditional Ethernet. In addition, for system configurations that have a single cable connected to the camera, the EC-1500C/U Series can pass through PoE (up to 15 W) to the camera. Designed to be a cost-effective, general-use product, the EC-1500C/U Series provides maximum flexibility in these applications without any programming.

The EthernetConnect EC-1500C/U Series is used to extend Ethernet over copper (EoC). The EC-1500C Series extends up to 16 ports of 10/100 Mbps Ethernet with pass-through PoE over coaxial cable. The EC-1500U Series extends up to 16 ports of 10/100 Mbps Ethernet with pass-through PoE over twisted pair Cat5/Cat5e/Cat6 UTP cable. Single-channel units can be powered from a PoE source, allowing for an installed network where power is not readily available.

Features

  • Transmits Individual Ethernet Data Channels with Pass-Through Power over Ethernet (PoE) over Standard Cat5/Cat5e/Cat6 UTP Cable or Coaxial Cable
  • Extends Ethernet up to 914 m (3,000 ft) at 10 Mbps or 610 m (2,000 feet) at 100 Mbps over Cat5/Cat5e/Cat6 U TP Cable
  • Extends Ethernet up to 1,524 m (5,000 ft) at 10 Mbps or 549 m (1,800 ft) at 100 Mbps over Coaxial Cable
  • Extended Temperature Operation from -40 to 75C (-40 to 167F)
  • Extended Pass-Through PoE Meets the IEEE802.3af Standard for Power over Ehernet
  • Supports Multicast, Unicast, and Jumbo Frame
  • Symmetric Bandwidth Provides Consistent Upload and Download with Virtually Zero Packet Loss over the Total Usable Distance
  • Type Tested to RFC-2544 TCP/IP Network Bandwidthacket Transmission Standards
  • User-Selectable Data Rate for Maximum Bandwidth and Transmission Distance Utilization
  • Complies with all Major IEEE Standards and RFC Network Protocols for UDP, TCP/IP, and HTTP/HTTPs
  • Tested and Certified by an Independent aboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions, and Transient Voltage Protection) of NEMA TS-1/TS-2 and th e Caltrans Specification for Traffic Signal Control Equipment
  • LED Status Indicators Confirm Operating Status
  • Available in Small Unit Size, Interchangeable Stand-Alone, or 1 RU Rack-Mounted Models
  • Designed and Manufactured in the USA
  • Full 10/100 Mbps Bandwidth
Brand

Reviews

There are no reviews yet.

Be the first to review “PELCO EC-1504U-W EthernetConnect Local or Remote Four Port Extender Cat5 with Pass Through PoE to 15 Watts Wall Mount”

Your email address will not be published. Required fields are marked *

EC-1504U-W Datasheet

Download