PELCO EC-4BY1SWCPOE-W EthernetConnect 4-Port Self Managed PoE Switch 30 Watts Per Port with Extended Coax Uplink Wall Mount

PELCO EC-4BY1SWCPOE-W EthernetConnect 4-Port Self Managed PoE Switch 30 Watts Per Port with Extended Coax Uplink Wall Mount

Pelco EC-4BY1SWCPOE-W | No Programming Required | Extended Temperature Operation of -40?C to 75?C (-40? to 167?F) | Electrical Ports Support Autonegotiation. Buy Now. Fast Shipping.

EC 4-Port SMS PoE Switch 30 Watts w/Coax Uplink.

The EthernetConnect EC-4BY1SWCPOE-W is an Ethernet switch with uplink management functionality that operates on the Ethernet over copper (EoC). It provides four ports operating at 10/100 Mbps and is designed to combine these four electrical ports into a single electrical extended port that forwards the data to the next network device. The switch does not require programming prior to use.

Features

• Transmits Individual Ethernet Data Channels with Pass-Through Power over Ethernet (PoE) over Standard Cat5/Cat5e/Cat6 UTP Cable or Coaxial Cable
• Extends Ethernet up to 914 m (3,000 ft) at 10 Mbps or 610 m (2,000 feet) at 100 Mbps over Cat5/Cat5e/Cat6 U TP Cable
• Extends Ethernet up to 1,524 m (5,000 ft) at 10 Mbps or 549 m (1,800 ft) at 100 Mbps over Coaxial Cable
• Extended Temperature Operation from -40 to 75C (-40 to 167F)
• Extended Pass-Through PoE Meets the IEEE802.3af Standard for Power over Ehernet
• Full 10/100 Mbps Bandwidth
• Supports Multicast, Unicast, and Jumbo Frame
• Automatic MDI/MDI-X Crossover
• Designed to Meet Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
• Voltage Transient Protection on all Power and Signal Input/Output Lines Provides Protection from Power Surges and Other Voltage Transient Events
• Power and Activity Status LED Indicators
• Hot-Swappable Rack Modules
• Interchangeable Between Stand-Alone or Rack Mount Usek
• IEEE802.3at Compliant
• Designed and Manufactured in the USA
• Pre-Programmed Port for Uplink
• 30 W PoE Capability on Ethernet Ports
• Electrical Ports Support Auto negotiation for 10 Mbps or 100 Mbps, Full-Duplex or Half-Duplex Data