Vertical Cable 056-460/P/BK Cat5e UTP HDBT Plenum 1000ft – Black

Vertical Cable 056-460/P/BK Cat5e UTP HDBT Plenum 1000ft – Black

In general, “Cat5e” refers to Category 5e, which is a type of Ethernet cable commonly used for network connectivity. It supports data transfer rates of up to 1000 Mbps (megabits per second) and is capable of transmitting data over relatively short distances, typically up to 100 meters or 328 feet.
The term “UTP” stands for Unshielded Twisted Pair, indicating that the cable does not have any additional shielding to protect against electromagnetic interference.
“HDBT” likely refers to HDBaseT, which is a technology used for transmitting high-definition multimedia signals, including audio, video, Ethernet, power, and control signals, over long distances using Cat5e or higher-grade cables.
The term “Plenum” suggests that the cable is plenum-rated. Plenum cables are designed to be installed in plenum spaces, which are the air-handling spaces found in buildings, such as the area above a suspended ceiling or below a raised floor. Plenum-rated cables have fire-retardant properties and meet certain safety standards for use in these areas.
Finally, “1000ft” refers to the length of the cable, which is typically measured in feet. In this case, the cable comes in a 1000-foot length.
The color “Black” simply indicates the outer jacket color of the cable.

Features

• Bandwidth: Cat5e cables typically have a bandwidth of 100 MHz, which means they can support data transmission at speeds up to 1000 Mbps.
• Compatibility: Cat5e cables are backward compatible with older Ethernet standards such as Cat5 and can be used for various networking applications, including Ethernet, Fast Ethernet, and Gigabit Ethernet.
• Conductor Construction: The cable is constructed with four twisted pairs of copper conductors, which are typically 24 AWG (American Wire Gauge) in size. The twisting of the pairs helps to reduce crosstalk and interference.
• Plenum-rated Jacket: The plenum-rated jacket is designed to meet specific fire safety standards for installation in plenum spaces. It has low smoke and low flame spread properties, reducing the risk of fire propagation.
• Length Markings: The cable may have length markings at regular intervals (e.g., feet or meters) to assist with measuring and cutting the desired length during installation.
• TIA/EIA Standards: Cat5e UTP cables conform to the specifications outlined by the Telecommunications Industry Association/Electronic Industries Alliance (TIA/EIA) for enhanced performance and reliability.
• Application: Cat5e UTP HDBT cables are commonly used in commercial and residential buildings for various applications, including local area networks (LANs), video distribution, audio distribution, security systems, and other data transmission purposes.

Specifications

• Cable Construction: The cable typically consists of four color-coded twisted pairs of copper conductors, which are insulated and twisted together to minimize interference. The pairs are often distinguished by different color combinations (e.g., blue/white-blue, orange/white-orange, green/white-green, brown/white-brown).
• Cable Jacket Material: The plenum-rated jacket is made of a fire-retardant material, often low-smoke polyvinyl chloride (PVC) or a special plenum-rated material such as fluoropolymer. It is designed to limit the spread of fire and emit low amounts of smoke and toxic fumes in the event of a fire.
• Cable Diameter: The cable diameter can vary, but Cat5e UTP cables generally have a diameter in the range of 5.6 to 6.0 mm (0.22 to 0.24 inches). The specific diameter may depend on the manufacturer and the construction of the cable.
• Impedance: Cat5e UTP cables typically have a characteristic impedance of 100 ohms, which matches the impedance requirements of Ethernet networks.
• Connectors: Cat5e cables often come unterminated, allowing you to add connectors of your choice. The standard connectors used for Cat5e cables are RJ-45 connectors, which are widely compatible with Ethernet devices.
• HDBaseT Compatibility: Cat5e UTP HDBT cables are specifically designed to support HDBaseT technology, allowing for the transmission of uncompressed high-definition video, audio, Ethernet, power, and control signals over long distances (up to 100 meters or 328 feet).
• Certifications: Look for cables that meet industry standards and certifications, such as UL (Underwriters Laboratories) or ETL (Intertek) listings, which ensure that the cable meets safety and performance requirements.
• Data Transmission Performance: Cat5e cables are designed to support data transmission speeds up to 1000 Mbps (or 1 Gbps). They also provide good resistance to crosstalk and interference, ensuring reliable data transmission.